Friday, 5 July 2013

Other things to do with a pocket watch die!



Hi, you may have noticed I seem to have a thing about the Tim Holtz pocket watch die, and have decided to try some different ideas.

Here is another one of I hope many depending on energy levels.Its hot and sunny here so decided. On a pretty summer theme, which for me lately is very different (I don't normally do pretty),may be after this all will change!

The first picture shows the finished pocket watch, this is a simple idea, using the pocket watch die as a window on the world.





I will list materials used and give you a brief rundown of how to put it together.

Dies used
Sizzix pocket watch
Sizzix movers and shapers circles
Impression obsession DIE042-1 spiral flower.                                                                                        
Impression obsession leaf cluster.                      
Spellbinders Expandable patterns, butterfly magic s5-153
Grunge board
Black with black core mount board
Clarity semi gloss card white
Clarity semi glossy paper
Various dye based stamping ink
Pro marker pens
Jones tones silver glitter
Textured card stock
Distressed paint picket fence
Collell universal glue
Art glitter glue dries clear

First I cut one whole pocket watch to use as a back (using grunge board).I then cut three pocket watch frames, using the sizzix largest movers and shapers circle die placed inside the pocket watch 
die. Two in grunge board to add depth when put together and the final one in black mount board.




The grunge board I painted white at the outer and inner edges also on the back of the solid watch, which will be where to inscribe or stamp a message.

Next I cut out the flowers using the semi glossy Clarity paper with the Impression Obssession mini spiral flower die. Then while still flat coloured them on both sides using pro markers ,using several colours on each flower allows the colour to mix as they blend together on the glossy surface.
Once dry,using tweezers rolled each flower up putting the side I wanted to show in the middle.
I didn't want to use a heat gun so I added a small circle of collall glue to a none stick craft sheet and placed an individual flower on the sheet.(This works well using the semi glossy paper, as it holds it's shape really well and is strong enough to push the petals into shape.

 









 

The next step was to create a back ground,i felt a sun set or sun rise would go well with the colours i had chosen for my flowers.this i created a bayer like effect using brushes,it does not have to be perfect.I used Clarity card for this as its surface is perfect for either brayer or brush effects with dye based inks.

 









 Here i cut out another pocket watch useing the Clarity gossy card {this one whole as if i was going to use it as a back}.I placed it where i wanted on the expadable patten die from Spellbinders cut it and then glued it on to the black pocket watch frame.







next i cut another expandable pattern this time using the whole die making sure that i had the butterfly as a whole, this i trimmed out to add on top once all the rest had been put together.




As you can see i added some Jones Tones glitter and two of the very small roses.
Then it was just glueing it together layer by layer starting from the back.
The layers are pocket watch back.
Backgound circle.
Two grunge board frames.
The black pocket watch frame with the expandable pattern glued to it.
Add the decorated butterfly the small leaves and flowers.

To finish here is a close up of the flowers.


 

Pin It

Im going to enter this in to the Country View Crafts challenge; Summer Sizzler.
 
To vist press the link below.


 



Wednesday, 26 June 2013

Country View Challenge

Welcome to my first web page and blog, I hope you like what you see !
As this is a new experience for me please excuse my mistake's.
Today I thought I would show you my grandads 100th birthday project, which I will try to enter
Into Country View crafts June challenge , which is all about die cuts.
Well here goes! Follow this link to see what the challenge is all about:










As you can see in the first photo, I used a Graphic 45 12 by 12 inch box, and using Tim Holtz distress paints coloured the box black. I then cut four pieces of card mitred each end to fit the box ,then cut out large and small cogs using the Tim Holtz sizzix dies ,glued them to my four card strips, at this point there was no need to colour them as I covered the mitred strips with aluminium plumbers tape, then ran them through my die cutting machine, using the embossing mat and thin rasberry plate.
Then I used the distressed black paint over the surface , after it started to dry I wiped it with a baby wipe ,so that some of the silver showed through. After it dried completely I stuck it onto the box and then rubbed various waxes onto the raised surface.
When all was dry I added various die cut cogs after colouring them with the metallic distressed paint.
In side the box I die cut the big shot pro large easel die,using mount board and decorated it with both eyelets and yet more die cut cogs!
Then I made up the pocket watches for the zeros, using Tim Holtz Sizzix pocket watch die, the large circles movers and shapers and the spellbinders cogs and gears embossing plate. I covered this again with the black distressed paint, wiping some off as it started to dry adding some of the smaller cogs from the Sizzix movers and shapers.
To these I added some sticky gems, well you do get jewelled watches, here I had to hold my self back not to make it too pretty ( as it is for a guy) I then suck them down over the top of the embossed background which was stuck to the back piece of grunge board. To make each pocket watch you need two pieces of grunge board ,out of the first one you cut one complete pocket watch and one with the centre cut out as a frame.
The second piece of grunge board you cut two frames, so each watch is made up of four layers of grunge board. I used one of my Sizzix die boxes and a spellbinders circle die for the glass look front of each watch and glued this in place before the last watch frame was put in place.i found it easier to colour the watch parts before putting them together , and then adding finishing touches after all the glue had dried.
The number one was made, still using four layers of grunge board, the die cut i used here was the large bigz serif letter R , cut from the first arm the centre two layers had a wedge cut out of the top so i could insert two layers of the ring from the top of the pocket watch die, this was coloured and put together just as the pocket watches were and a layer of metalic film this time stuck on water coloured paper to give it bulk before running it through the embossing machine.
This is also what I used on in the back ground of the watches. Some small jewelled cogs were added, then the one and both pocket watches were tied on to the easel which was in turn tied to a large 12 by 12 inch piece of card and fixed to the back of the box.
I hope this is not too long winded.
 





Pin ItJust to finish off here's a close up of the pocket watch!
Fingers crossed my grandad likes it.
 
I'll let you know in a couple of weeks.

Well heres Grandad on his birthday!